电话
联系我们
CONTACT US
传真:0531-86370030
邮箱:870027617@qq.com
地址:济南市历城区世纪大道与唐冶中路交汇处绿地汇中心23号楼—102室
知识专栏
您当前所在的位置:首页 - 新闻资讯 > 知识专栏 >
在搭建防腐木凉亭之前,为何对防腐木进行干燥处理?

来源:http://www.jnajgc.com 时间:2022-12-23

防腐木具有防腐、防潮、防真菌等特点,而且外观精美,施工便利,因而很多户外凉亭争相选用防腐木材质。很多人以为防腐木才是经过厂家处理过的木材,所以防腐木凉亭在搭建时根本不必在做任何处理,以至于防腐木凉亭在后期使用出现各种问题,以至于使用寿命缩短。其实为了打造让防腐木凉亭达到理想的使用效果,在搭建之前,是应该对所选用的防腐木进行干燥处理的。
Anticorrosive wood has the characteristics of anti-corrosion, moisture-proof, fungus proof, etc., and it has beautiful appearance and convenient construction, so many outdoor pavilions are competing to choose anti-corrosion wood materials. Many people think that the antiseptic wood is the wood that has been treated by the manufacturer, so the antiseptic wood pavilion does not need to be treated at all when it is built, so that there are various problems in the later use of the antiseptic wood pavilion, so that the service life is shortened. In fact, in order to make the anti-corrosion wood pavilion achieve the ideal use effect, the selected anti-corrosion wood should be dried before construction.
一、减轻木材的重量。经过干燥后,防腐木的重量可减轻约30-50%,有利于提高车辆的运载能力。保证木材制品的质量,改善防腐木的使用性能,延长使用年限,节约木材。
1、 Reduce the weight of wood. After drying, the weight of anti-corrosion wood can be reduced by about 30-50%, which is conducive to improving the carrying capacity of vehicles. Ensure the quality of wood products, improve the service performance of anti-corrosion wood, extend the service life and save wood.
二、提高使用的稳定性。防腐木长期暴露在空气中会发生湿胀和干缩现象,而木材的不均匀的湿胀干缩,往往会引起木材开裂和变形,影响使用,造成浪费。若用湿的木材或没有干燥好的木材制造产品,刚刚做好时好像不错,可是经过一段时间后,随着木材的变干就会发生门框歪斜、地板翘曲、接榫松脱或板面开裂等现象,造成很大的损失。
2、 Improve the stability of use. Preserved wood will expand and shrink when exposed to the air for a long time. Uneven expansion and shrinkage of wood will often cause wood cracking and deformation, affect use and cause waste. If the product is made of wet wood or not dried wood, it seems good when it is just finished, but after a period of time, as the wood dries, door frame deflection, floor warping, loose joints or plate surface cracking will occur, causing great losses.
三、提高木材和木制零件的强度,当木材含水率低于纤维和饱和点时,木材的强度将随着木材含水率的降低而提高。经过干燥后的木材,可以改善切削加工条件,提高防腐木结构零件的强度、胶接强度与木制品的表面装饰质量。木材的导热性质与导电性质是随着它的含水率的改变而改变的,要提高木材的保温性与绝缘性,也需要用降低含水率的办法减小导热性与导电性。
3、 Improve the strength of wood and wood parts. When the moisture content of wood is lower than fiber and saturation point, the strength of wood will increase with the decrease of wood moisture content. The dried wood can improve the cutting conditions, the strength and bonding strength of anti-corrosion wood structural parts and the surface decoration quality of wood products. The thermal conductivity and electrical conductivity of wood change with the change of its moisture content. To improve the thermal insulation and insulation of wood, it is also necessary to reduce the thermal conductivity and electrical conductivity by reducing the moisture content.

四、预防木材的贬质和腐朽。湿木材如果长时间堆放在露天空气中,若不采取适当的措施,往往会发生腐朽或遭虫害。当木材含水率降低到20%以下时,可大大减少菌类和害虫的侵害与破坏。把木材干燥到含水率8-15%左右。
4、 Prevent deterioration and decay of wood. If the wet wood is stacked in the open air for a long time, if appropriate measures are not taken, it will often rot or be damaged by insects. When the moisture content of wood is reduced to less than 20%, it can greatly reduce the invasion and destruction of fungi and pests. Dry the wood to a moisture content of 8-15%.
或许有人觉得将防腐木干燥处理太多余。其实这样做不仅不会显得多余,反而对产品的寿命延长,以及它外观的打造有很大的好处,所以还是要将其干燥处理,发挥它的长处。
Some people may think that drying antiseptic wood is too redundant. In fact, this will not be redundant, but will be very beneficial to the product's life and appearance. Therefore, it is necessary to dry it to give full play to its advantages.
以上就是为大家介绍的有关济南防腐木的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jnajgc.com
The above is a detailed introduction of Jinan antiseptic wood, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.jnajgc.com