1： In the construction, if possible, the existing size and shape of anticorrosive wood should be used as much as possible. Any processing of the impregnated material, such as drilling, fine planing and cutting, will shorten the service life of the impregnated material. This can reduce the possibility of wood cracking. If the thickness is greater than 38mm, a small groove with width of 10mm and depth of 10mm can be opened on the central line of one side of the wood core to prevent deformation.
2： Holes shall be drilled in advance when connecting, so as to avoid cracking, and the glue shall be waterproof.
3： Try to use more than two-level anti-corrosion wood cube, because its moisture content is less than 20%, it can effectively prevent cracking and deformation. If it is necessary to use the grade with water content greater than 20%, the stacking of timber on the construction site shall be such that there is a gap of 10-20mm in each layer, and it can be placed on the site for more than 72 hours before construction, and the direct sunlight shall be prevented during this period. It is recommended to use hot-dip galvanized nails or screws for connection and installation at the top of the construction.
Scope of experience
1. Anticorrosive wood floor, anticorrosive wood flower rack, anticorrosive wood Pavilion, anticorrosive wood fence, anticorrosive wood products, anticorrosive wood varieties. wait
2. Borlaug floor, Indonesia Borlaug, Myanmar Borlaug, Brazil Borlaug, Africa Borlaug, etc
3. Hemlock door, hemlock window, hemlock pillar, hemlock bed, etc
4. Cypress, Douglas fir, camphor pine, larch, spruce, white pine, log, etc