户外木材应在户外阴干到与外界环境的湿度大体相同的程度再施工。使用含水量很大的木材施工安装后会出现较大的变形和开裂。
Outdoor wood shall be constructed in the outdoor shade and dry to the extent that the humidity is roughly the same as that of the external environment. Large deformation and cracking will occur after construction and installation of wood with high water content.
在施工现场，防腐木材应通风存放，应尽可能地避免太阳暴晒。
At the construction site, the antiseptic wood shall be stored in a ventilated manner and protected from the sun as much as possible.
在施工现场，应尽可能使用防腐木材现有尺寸，如需现场加工，应使用相应的防腐剂充分涂刷所有切口及孔洞，以保证防腐木材的使用寿命。
At the construction site, the existing size of anti-corrosion wood shall be used as much as possible. If on-site processing is required, all cuts and holes shall be fully coated with corresponding anti-corrosion agent to ensure the service life of anti-corrosion wood.
在搭建露台时尽量使用长木板减少接头，以求美观;板面之间留5mm—10mm缝隙。
When building the terrace, try to use long boards to reduce joints, so as to be beautiful; A 5mm - 10mm gap shall be reserved between the plates.
所有的连接应使用镀锌连接件或不锈钢连接件及五金制品，以抗腐蚀，绝对不能使用不同金属件，否则很快会生锈，使木制品结构受到根本损伤。
All connections shall use galvanized connectors or stainless steel connectors and hardware products to resist corrosion. Never use different metal parts, otherwise it will rust quickly and cause fundamental damage to the wooden structure.
在制作和穿孔的过程中，应先用电钻打眼，然后用螺丝等固定，以免造成人为的开裂。
In the process of fabrication and perforation, the electric drill should be used to drill holes first, and then fixed with screws to avoid man-made cracking.
虽然处理后的木材可以防菌、防霉变及白蚁侵蚀，但我们仍然推荐您在工程完工后，待木材干燥或风干后在其表面上使用木材防护漆进行涂刷。使用户外木材专用漆时应注意首先要充分摇匀，涂饰后需24小时的晴天条件，使涂料在木材表面成膜。
Although the treated wood can resist bacteria, mildew and termite attack, we still recommend that you use wood protective paint on its surface after the completion of the project and after the wood is dried or air-dried. When using the special paint for outdoor wood, it should be noted that the paint should be fully shaken. After finishing, it needs 24 hours of sunny conditions to make the paint film on the wood surface.
防腐木表面用户外防护涂料或油基类涂料涂刷完后，为了达到最佳效果，48小时内避免人员走动或重物移动,以免破坏防腐木面层已形成的保护膜。如想取得更优异的防脏效果，必要时面层再做两道专用户外清漆处理。
After the anticorrosive wood surface is painted with outdoor protective paint or oil-based paint, in order to achieve the best effect, avoid people walking or heavy objects moving within 48 hours to avoid damaging the protective film formed on the anticorrosive wood surface. If you want to achieve better anti-fouling effect, the surface layer should be treated with two special outdoor varnishes if necessary.
及时清洁定期打蜡，防腐木表面清洁可用一般洗涤剂来清洗，工可用刷子;在后期使用中，需要定期，一般间隔一年到一年半的时间，用木蜡油对防腐木表面做好保护处理，来增强其表面的防水防污性能。
Clean in time and wax regularly. The surface of anticorrosive wood can be cleaned with general detergent, and workers can use brushes; In the later use, it is necessary to use wood wax oil to protect the surface of anticorrosive wood at regular intervals of one year to one and a half to enhance its waterproof and antifouling performance.
Thank you for reading. The source of this article is Shandong Antiseptic Wood. For more information and questions, please click: http://www.jnajgc.com We will continue to work hard to provide you with services. Thank you for your support!
传真：0531-86370030
