电话
联系我们
CONTACT US
传真:0531-86370030
邮箱:870027617@qq.com
地址:济南解放东路29号
公司要闻
您当前所在的位置:首页 - 新闻资讯 > 公司要闻 >
防腐木怎么进行刷油漆呢?

来源:http://www.jnajgc.com 时间:2021-01-11

防腐木是选用防腐剂渗透并固化木材后,使得木材具备了防腐的特点,而防腐木怎么油漆的工艺步骤一直是消费者备受困扰的事,与此同时大家对油漆的选择都不了解,那么防腐木怎么刷油漆呢?
Antiseptic wood is the choice of preservatives to penetrate and solidify wood, which makes wood have the characteristics of antisepsis. How to paint antiseptic wood is always a problem for consumers. At the same time, we don't know the choice of paint, so how to paint antiseptic wood?
1.须在8℃之上的气温下进行加工。
1. It must be processed at the temperature above 8 ℃.
2.木料需要干燥,含水率不超过15%。
2. The wood should be dried, and the moisture content should not exceed 15%.
3.涂木蜡油前须将木材表面用细砂布打磨,并擦净至表面光滑。木材表面若有纤维,可以用木砂纸P240或之上轻轻地砂光。
3. Before applying wood wax oil, the surface of wood shall be polished with fine abrasive cloth and cleaned until the surface is smooth. If there is fiber on the surface of wood, it can be gently sanded with wood sandpaper P240 or above.
4.应用前充分搅拌均匀,不需要稀释;若产品粘度偏高,也可兑入少许专用稀释剂,加入量不宜超过10%。
4. Before application, stir well without dilution; if the viscosity of the product is high, add a little special diluent, and the amount should not exceed 10%.
5.刷涂需应用软棕毛刷,沿木材纹理方向均匀、薄薄地刷一遍,刷完后去除多余木蜡油,涂刷量一定要少,不可以涂的过厚;待表面实干后,对被涂物轻轻打磨、擦净,12小时候可涂第二遍。
5. The soft brown brush should be applied to brush the wood evenly and thinly along the direction of wood texture. After brushing, the surplus wood wax oil should be removed. The amount of brushing must be small and not too thick. After the surface is dry, the coated material should be polished and cleaned gently, and the second time can be applied after 12 hours.
6.擦涂前,先将无尘布浸润均匀,将过多的蜡油挤出一部份;擦涂时用劲要均匀,不可以用劲过重或过轻,先顺被涂物表面横竖交替各擦几次。
6. Before wiping, soak the dust-free cloth evenly and squeeze out part of the excessive wax oil. When wiping, the force should be uniform, not too heavy or too light. First, wipe the dust-free cloth horizontally and vertically alternately along the surface of the coating for several times.