电话
联系我们
CONTACT US
传真:0531-86370030
邮箱:870027617@qq.com
地址:济南解放东路29号
公司要闻
您当前所在的位置:首页 - 新闻资讯 > 公司要闻 >
防腐木油漆施工注意事项!

来源:http://www.jnajgc.com 时间:2020-03-13

你对防腐木了解多少?在使用防腐木时有哪些注意事项:
What do you know about antiseptic wood? What are the precautions when using anticorrosive wood:
1、在施工现场,木侧必须堆放在每层10-12毫米的间隙内,并防止雨水或阳光直射。
1. At the construction site, the wood side must be stacked in a gap of 10-12mm for each layer and protected from rain or direct sunlight.
2、在施工中,可采用防腐木现有尺寸,如切割、钻孔等,必须采用防腐剂进行刷补,以保证防腐层的完整性。
2. In the construction, the existing size of anticorrosive wood can be used, such as cutting, drilling, etc., and preservative must be used for brush repair to ensure the integrity of the anticorrosive coating.
3、应在接头处进行预钻孔,以减少裂缝。
3. Pre drilling shall be carried out at joints to reduce cracks.
4、所有连接必须使用热镀锌紧固件或不锈钢五金件以防腐蚀。
4. Hot dip galvanized fasteners or stainless steel hardware must be used for all connections to prevent corrosion.
5、搭一个平台和栈道,尽量用长木板,以减少接缝美观。板之间应留有3-7mm的间隙。
5. Set up a platform and plank road, and try to use long plank to reduce the beautiful joint. There should be a gap of 3-7mm between plates.
防腐木和碳化木之间的差异
6、防腐木用胶粘剂应防水、耐候。
6. The adhesive for anticorrosive wood shall be waterproof and weather resistant.
7、室外施工应做好养护工作,如刷木油,避免因日晒雨淋造成木材开裂和变形现象。
7. Maintenance work shall be done well in outdoor construction, such as brushing wood oil to avoid wood cracking and deformation caused by sun and rain.
8、油漆时,必须选用水性防紫外线油漆,潮湿的木材表面不应油漆。
8. When painting, water-based UV resistant paint must be selected, and the wet wood surface shall not be painted.
9、木方厚度大于35mm,为防止其变形,可在芯侧中心线开一条宽、深约10mm的小曹。
9. The thickness of the batten is more than 35mm. In order to prevent its deformation, a small Cao with width and depth of about 10 mm can be opened at the center line of the core side.
10、应在不同的使用环境(如地面、地下或水中)中使用不同等级的防腐木材,以确保达到设计使用寿命。
10. Different grades of preservative wood shall be used in different environments (such as ground, underground or water) to ensure the design service life.