电话
联系我们
CONTACT US
传真:0531-86370030
邮箱:870027617@qq.com
地址:济南解放东路29号
公司要闻
您当前所在的位置:首页 - 新闻资讯 > 公司要闻 >
什么因素造成防腐木的质量问题?

来源:http://www.jnajgc.com 时间:2020-01-31

大家都知道防腐木有价格高也有价格低的,影响价格的主要的因数防腐木的质量,好的质量价格高,质量低的价格低,那是什么因素造成防腐木的质量问题。
We all know that antiseptic wood has both high price and low price. The main factors that affect the price are the quality of antiseptic wood, good quality and high price, and low quality and low price. What causes the quality problems of antiseptic wood.
一直在和含水量“争斗”
Always fighting with water content
一.我们肯定是需要知道,其实想要保证防腐木的质量,我们肯定是需要一直和防腐木内部含水量工作的。一般来说防腐木可能会出现变形和开裂的现象,而我们知道,之所以防腐木会变形和开裂,主要还是因为防腐木内部含水量在短时间之内有比较大的变化,进而出现了这种情况。
1、 We need to know that, in fact, to ensure the quality of anti-corrosion wood, we must always work with the internal moisture content of anti-corrosion wood. Generally speaking, the anti-corrosion wood may be deformed and cracked, and we know that the main reason why the anti-corrosion wood will be deformed and cracked is that the internal moisture content of the anti-corrosion wood changes greatly in a short period of time, and then this situation occurs.
二.我们肯定是要防虫的,避免防腐木被虫蛀,而如果防腐木内部含水量比较大,就会让防腐木内部存在微生物生存的环境,这肯定也会对防腐木的质量有所影响。
2、 We must be insect proof to avoid the moth eaten wood. If the water content in the wood is large, there will be a living environment for microorganisms in the wood, which will certainly affect the quality of the wood.
导致防腐木内部含水量变化的原因都有哪些
What are the reasons for the change of water content in the anticorrosive wood
当然我们肯定还是要知道,究竟是什么样的原因才导致防腐木含水量出现变化的,究 竟是什么样的原因呢?
Of course, we still need to know what causes the change of moisture content of antiseptic wood and what causes it?
1、外部的保护工作没有做好。含水量变化在很大程度上其实是因为防腐木外部保护工作没做好,让外部环境影响了防腐木的质量。表面的保护层是会随着时间的的推移而有所磨损的,所以定时的检查和修补工作肯定是不能少的。
1. External protection was not done well. To a large extent, the change of water content is actually due to the failure of external protection of anti-corrosion wood, which makes the external environment affect the quality of anti-corrosion wood. The protective layer of the surface will be worn with the passage of time, so regular inspection and repair work must be indispensable.
山东济南景观小木屋
2、要注意到防腐木本身的含水量。一般来说处理之后的防腐木内部含水量是比较少的,此时肯定要让防腐木内部的含水量和环境平衡,之后做好保护,如果在水分还非常多的时候就做建设,可能建设一段时间之后就因为内部含水量的问题而导致防腐木出现变形和开裂的现象。
2. Note the moisture content of the preservative wood itself. Generally speaking, the internal moisture content of the treated anti-corrosion wood is relatively small. At this time, it is necessary to balance the internal moisture content and the environment of the anti-corrosion wood, and then do a good job of protection. If the construction is carried out when the moisture is still very much, it may cause deformation and cracking of the anti-corrosion wood due to the internal moisture content problem after a period of construction.
我们肯定要关注到防腐木的含水量问题,因为从当前的情况来看,如果含水量出现了问题,这就可能会导致防腐木质量出现问题,影响我们建设的质量。
We must pay attention to the water content of anti-corrosion wood, because from the current situation, if there is a problem in the water content, it may cause problems in the quality of anti-corrosion wood and affect the quality of our construction.